Fostex VF08 Bedienungsanleitung PDF herunterladen (Seite 11)

If an error occurs for some reason during the

save operation, the error message as below ap-

pears. If it appears, press the [EXIT/NO] key.

The display returns to the previous screen be-

fore performing the save operation.

Note that saved data before the error message

appears is all invalid.

If you save data to more than one disc, we rec-

ommend to put a number on each disc in the

saving order (such as DISC-1, DISC-2, etc.) so that

you will easily know the order for inserting discs

when loading data.

In the description for saving data above, we as-

sume to use a non-recorded CD-RW/CD-R disc.

If you use a recorded disc (including a disc on

which computer data is recorded), also note the

following.

By performing step 5 in the save operation proce-

dure shown above (“While “BkUp” is flashing, press

the [ENTER/YES] key”.) When a recorded disc is

inserted, the display shows a warning message,

followed by the confirmation screen (where “Sure?”

flashes).

With this screen, you can choose whether erasing

the recorded data or ejecting the disc.

• To erase the existing (recorded) data

Press the [ENTER/YES] key while both “ERASE” and

“Sure?” are flashing.

The display shows the screen below and the VF08

starts erasing the disc.

As the erase process progresses, the number of

flashing “ * ” increases from left to right.

Immediately after completing erasing the disc, the

display shows the same screen (for selecting a pro-

gram to be saved) which appears after step 5 is

performed. Hereafter, perform the same procedure

as described above.

<Note>

You cannot abort the save operation before com-

pleted. Especially during the save operation to

more than one disc, if you happen to press the

[EXIT/NO]

key while removing or inserting a disc,

you have to redo the save operation from the

beginning with the first disc.

<Note>

If the message above appears while saving

data to a CD-R disc, you can no longer use the

disc.

8. Press the [EXIT/NO] key (or the [STOP] key) to exit the

Setup mode.

When saving data to more than one disc, the first disc

will be ejected when it is full (i.e. there is no more record-

ing space on the disc), while “Insert Disk!” appears on the

screen. After inserting the second disc, the VF08 auto-

matically resumes the save operation.

After completing the save operation, the final disc is

ejected and the above screen appears. (See <Note> be-

low).

flashing flashing

flashing

Increases as the process progresses.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Fostex VF08 Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Fostex VF08