Fostex 8360 Bedienungsanleitung

Model 8360 Owner’s Manual(Ether card for the Model D2424 / D2424LV)Table of ContentsIntroduction ...

After making all necessary settings described ear-lier, make the following setting for the FTP applica-tion you use before opening the connection to t

1. Log in to the D2424/D2424LV from the personal computervia the network.2. Select the program folder to which you are going to put thefile.If you wan

<PORTUGAL>NAME: Caius - Tecnologias Audio e Musica, Lda.ADD: Rua de Santa Catarina, 131 4000 Porto, PortugalTEL: (+351) 2-2086009/2001394,FAX: (

Currently we confirm that the following FTP clientapplications can be used with the Model 8360.FTP client applicationsThank you very much for purchasi

There are two types for connecting the recorder to a personal computer using the LAN cable; one to oneconnection and LAN connection. The following des

Connection to an existing LANTo connect the recorder to an existing LAN, use a "straight cable of category 5 or higher" for connectionbetwee

Make the settings in the "TCP/IP Setup?" menuwhich is added to the setup mode of the recorderso that the Model 8360 can be used as an FTP se

You must set the IP address for the recorder.IP address setting1. Use the JOG dial to bring up "IP Addr.?" and press the[EXECUTE/YES] key.Th

7This setting selects whether the 8360 checks theuser name and password or not when logging in.If it is set to "ON", the 8360 does not check

3. After entering the login name, press the [EXECUTE/YES]key.The display now shows the screen for entering a password,where the leftmost digit flashes

After completing the "TCP/IP Setup?" setting for therecorder, set the TCP/IP and connection settingsfor the personal computer.Personal compu